2019 Land Pride RC5014

Call for Price


Availability
Brochure
Year
2019
Manufacturer
Land Pride
Model
RC5014

Overview

Description

Specifications
  • Min. horsepower: 90 power take-off horsepower (67.1 kw)
  • Gearbox horsepower: 250 (186.4 kw) Splitter 225; (167.8 kw) Center deck & wing deck
  • Gearbox lubrication & capacity: Center deck & wing: 10 pints (4.73 L) of gear lube 80-90W EP; Divider gearbox: 5.5 pints (2.60 L) of gear lube 80-90W EP
  • Cutting capacity: Up to 3" (7.6 cm) material
  • Machine weight: 7,340 lbs (3,329.4 kg)
  • Blade tip speed: Center blade: 17,377 FPM (88.3 mps) & wing blade: 17,329 FPM (88 mps)
  • Tongue weight: 2,668 lbs (1,210.2 kg)
  • Hitch types: Standard clevis hitch, pintle hitch, ball hitch, LP performance hitch and bar-tite hitch
  • Hitch jack: Standard hand crank
  • Signal lights: LED (standard)
  • 7 Pin connector: SAE J560 pin configuration
  • Cutting width: 13'-6" (4.11 m)
  • Overall width: 15' (4.57 m)
  • Minimum transport width: 8'-9" (2.44 m)
  • Overall length: 19'-3" (5.87 m)
  • Deck height: 10 1/2" (3.06 m)
  • Cutting height: 2" (5.1 cm) to 14" (35.6 cm) with hydraulic cylinder and stroke control spacers (Maximum cut height is dependent on tire options selected.)
  • Lift hydraulics: 4" x 8" Hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing hydraulics: 3 1/2" x 12" Hydraulic cylinders, hoses & fittings
  • Wing transport protection: Wing transport lock
  • Deck sheet thickness: 10g (3.4 mm) top and 10g (3.4 mm) bottom
  • Side skirt thickness: 1/4" (6 mm)
  • Wing deck skid shoes: Replaceable
  • Center deck skid shoes: Replaceable
  • Weight box skid shoe: Replaceable
  • Blades - 4 (2 per carrier): 1/2" (13 mm) x 4" (10.2 cm) Heat-treated, free-swinging alloy steel with uplift
  • Blade overlap: 6" (16.2 cm)
  • Blade bolt: Keyed with hardened flat washer & locknut
  • Blade holder: 1" (2.5 cm) diamond shaped blade bar
  • Stump jumper: 3/16" (5 mm) Round dish shaped bolt-on stump-jumper (optional)
  • Deck ring: 1/2" (13 mm) x 3" (7.6 cm) fully welded
  • Front & rear guards: Single chain or double chain
  • Heavy duty Input driveline options: Constant velocity u-joint ASAE Cat. 6 with or without over running clutch
  • Heavy duty Intermediate & wing drivelines: ASAE Cat. 5 with slip-clutch protection
  • Tire & wheel options: 6" x 21" Laminated tires; 6" x 26" Laminated tires; 27" x 7.75" x 15" Used aircraft tires with foam filling; 29" Used aircraft tires
  • Number of wheels: 5 - Wheel option: 4 on transport axle and one on wing axle; 6- Wheel option: 4 on transport axle and two on wing axle
  • Transport axle: Spring-cushioned on center transport axle or optional walking tandem on center axle
  • Hubs: Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4" (4.4 cm) shafts
Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money.
  • 7 Year gearbox warranty (Years 6 & 7 Parts Only): Shows confidence in our gearboxes.
  • Fully welded top deck: Fully welded deck adds strength.
  • 250 hp (168.4 kw) divider gearbox, 225 hp (167.8 kw) spindle gearboxess: Rugged heavy built gearboxes capable of handling heavy cutting applications
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life
  • Input driveline: Cat. 6 CV: Holds up to shock loads and harsh mowing conditions. Fits wide range of tractors including high horsepower tractors
  • Star profile drivelines: Star profile spreads load out to many points on the shaft. More apt to resist bending and twisting under shock loads and harsh mowing conditions.
  • Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles
  • 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed: 540 rpm: Center: 17,377 fpm (88.3 mps), Wings: 17,329 fpm (88 mps) 1000 rpm: Center: 18,165 fpm (92.3 mps), Wings: 18,317 fpm (93.1 mps) Allows for a clean cut of material and even distribution.
  • Input driveline: Cat. 6 CV or Cat. 5 conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • 6" (15.2 cm) Blade overlap: Generous blade overlap eliminates skipping, especially in turns
  • High cutting capacity: Can cut brushy areas with saplings up to 3" (7.6 cm).
  • 10 1/2" (26.7 cm) Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck
  • 3/16" (5 mm) stump jumper (optional) backed with a 1" (1.5 cm) thick mounting bar: Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
  • 10 gauge (3.4 mm) double deck: Heavy enough to handle conditions but not weigh unit down.
  • Self-leveling pull-type hitch (optional): Reduces drawbar wear by keeping hitch level while going through ditches
  • LED Signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
  • Hinged wing section: Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" (2.5 cm) Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock: Safety feature. Holds wing up in case of hydraulic pressure loss.
  • 1" (2.5 cm) Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • 5" (12.7 cm) Square rear axle tubing: Heavy axle to handle harsh conditions.
  • Spring-cushioned center-axle: Protects unit from bumps and ground shock.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.
  • Bar-tite hitch (optional): Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Wheel options - Laminated tires: Eliminates flats; Airplane tires without foam filling: Give better cushion while transporting; Airplane tires with foam filling: Give better cushion while transporting and can’t go flat.
  • Deck rings (optional): 1/2" (13 mm) x 3" (7.6 mm) Welded deck ring keeps blades from damaging the deck.

Specs

General

Working Width
13'-6" (4.11 m)
Width
15' (4.57 m)
Length
19'-3" (5.87 m)
Weight
7,282 lb.
Recommended HP
90 power take-off horsepower (67.1 kw)

Related Products