2019 Land Pride RC5610 Series 2

Call for Price


Availability
Brochure
Year
2019
Manufacturer
Land Pride
Model
RC5610 Series 2

Overview

Description

Making roadside cutting safe and efficient. Left hand weight box, Optional hitch configurations, Optional deck rings, Replaceable 1/4" sideskirt with replaceable skid shoe , Smooth top design, Heavy-duty dishpans

Specifications
  • Horsepower Range: 50 to 250
  • Gearbox Horsepower: 250 hp Splitter 210 hp Center & Wing
  • Gearbox Lubrication: Gear Lube 80-90W EP
  • Gearbox Oil Capacity: 5.5 Pints: Divider Gearbox 10 Pints: Center deck & RH deck spindle gearboxes
  • Cutting Capacity: 4"
  • Tongue Weight: 2,060 lbs.
  • Machine Weigh: Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch 5,277 lbs.
  • Blade Tip Speed: Center Blades = 16,300 FPM; Wing Blades = 16,300 FPM
  • Hitch Types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch Jack: Standard (7,000 lbs.)
  • Signal lights: 7 Pin connector LED, SAE J560 pin configuration
  • Wing Offset: Right wing model with weight box on left side
  • Cutting Width: 10' - 6"
  • Overall Width: 11' - 7"
  • Minimum Transport Width: 7'-5 1/2" With transport lock & deflectors removed and hydraulic cylinders fully retracted
  • Overall Length: 16' - 0"
  • Deck Height: 12"
  • Cutting Height: 2" to 14"
  • Lift Hydraulics: 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Hydraulics: 3" x 8" hydraulic cylinder, hose & fittings
  • Wing Transport Protection: Wing transport lock pin
  • Deck Material: 10 gauge top deck and 7 gauge bottom deck
  • Side Skirt Material: Bolt-on replaceable 1/4" steel
  • Skid Shoes: Center Deck: AR400 2 Replaceable skid shoes only; Weight Box: Reversible & replaceable skid shoe; Wing: 2 Replaceable parts: Standard straight skid shoe with hardened leading skid shoe.
  • Blades - 4 (2 per Carrier): 1/2" x 4" Heat treated free swinging alloy steel with up lift
  • Blade Overlap: 6"
  • Blade Bolt: Keyed with hardened flat washer & locknut
  • Stump Jumper / Blade Holder: 3/16" Thick round dish-shaped pan, reinforced with 1" x 5" blade bar; or optional Shredder Kit
  • Deck Ring: Optional 1/2" x 3" fully welded
  • Front & Rear Guards: Optional rubber, single chain, double chain, or double chain with cable
  • Input Driveline: 540 & 1000 rpm Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate Driveline: Category 5 star profile with slip-clutch
  • Wing Driveline: Category 4 star profile with slip-clutch or optional Cat. 5 w/slip clutch
  • Wheel Options: 6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 29" x 16 ply used aircraft tires without foam filling.
  • Number of Wheels: 5 - Wheel option: 4 on transport axle and one on wing axle, 6 - Wheel option: 4 on transport axle and two on wing axle
  • Transport Axle: Spring-cushioned on trailing arms
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight on tractor tongue: Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor PTO shaft.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches, Cat. 4 standard: Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing U-joints and inner profiles.
  • High blade tip speed: Allows clean cutting of material and even distribution.
  • 6" Blade overlap: Eliminates skipping during turns.
  • High cutting capacity: Can cut brushy areas with saplings up to 4" with 56 Series and 4 1/2" with 66 Series.
  • 12" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 3/16" Stump jumper backed with a 1" thick mounting bar: Heavy round stump jumper. Can hold up to tough conditions.
  • Pre-cut chamber: Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
  • Reinforced leading edge: Front of deck can withstand heavy brush and saplings.
  • Collapsible leveling rods: Prevents damage and failure to leveling rods.
  • 1" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • 10 Gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 7 Gauge smooth deck bottom: Heavy deck design holds up to harsh conditions. No bottom obstructions.
  • Replaceable 1/4" side skirt: Reduces debris piercing possibilities. Can be replaced if damaged.
  • Beveled skid shoes on wing deck: Reduces gouging the ground when turning.
  • Hinged wing section: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock: Holds transport wing in the folded-up position in case of hydraulic pressure loss.
  • Enclosed dual leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned trailing arms: Provides independent suspension, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Bar-tite hitch: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting.; Foam-filled tires: Give better cushion while transporting and can’t go flat
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.
  • Deck rings (optional): Keeps blades from damaging the deck.
  • LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.

Specs

General

Working Width
10 ft. 6 in.
Width
11 ft. 7 in.
Length
16 ft.
Weight
5,277 lb.
Recommended HP
50-250 hp

Related Products