2019 Land Pride RCB6610 Series 2

Call for Price

No Image Available
Land Pride
RCB6610 Series 2



The RCB6610 Series Offset Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right of ways, roadsides, pastures, set-aside acres, or for residue in row crop fields. The 10' cutting width, 2" to 14" cutting height and ability to cut weeds and brush up to 4 1/2" in diameter make them well suited for these applications. This series offers various axle configurations and safety guard selections making them an excellent choice for agricultural, state, and municipal mowing applications.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
  • Rugged heavy built gearboxes: Gearboxes are capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • Self-leveling hitches: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
  • Input driveline: Cat. 6 CV or Cat. 5 conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing the U-joints and inner profiles.
  • 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed: Allows clean cutting of material and even distribution. See Specifications for actual FPM.
  • 6" Blade overlap: Eliminates skipping during turns.
  • High cutting capacity: Can cut brushy areas with saplings up to 4 1/2".
  • Pre-cut chamber: Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
  • Reinforced leading edge: Front of deck can withstand heavy brush and saplings.
  • 12" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 10 Gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 7 Gauge smooth deck bottom: Heavy deck design holds up to harsh conditions. No bottom obstructions.
  • Replaceable 1/4" side skirt: Reduces debris piercing possibilities. Can be replaced if damaged.
  • 3/16" Round stump jumper backed with a 1" thick mounting plate: Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
  • Spindle nut protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
  • Beveled skid shoes on wings: Reduces gouging the ground when turning.
  • LED signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Greasable wing folding hinge: Provides for a long hinge life and allows the wing to fold up and down with less stress.
  • 1" Solid hinge rods: Gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock: Holds transport wing in the folded-up position in case of hydraulic pressure loss.
  • Collapsible 1" Leveling rods: Prevents damage and failure to leveling rods. Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Enclosed dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims
  • Spring-cushioned trailing arms: Provides independent suspension, cushions loads on drawbar.
  • Horsepower range: 50 to 250
  • Gearbox horsepower: 250 hp splitter, 210 hp center & wing
  • Gearbox oil capacity: 5.5 Pints: divider gearbox; 10 Pints: center deck & RH deck spindle gearboxes
  • Gearbox lubrication: Gear Lube 80-90W EP
  • Cutting capacity: 4 1/2"
  • Total Machine weight: Equipped with double row chain guards w/cable, 6 ACFF tires, tandem axle, deck rings, swivel clevis hitch & winch: 1,842 lbs.
  • Tongue Weight: 6,060 lbs.
  • Blade tip speed : Center blades = 16,300 FPM, Wing blades = 16,300 FPM
  • Tongue types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch jack: Standard (7,000 lbs.)
  • Signal lights: LED
  • 7 Pin connector: SAE J5560 pin configuration
  • Cutting width: 10' - 6"
  • Overall width: 11' - 6 3/4"
  • Minimum transport width: 7' - 5 1/4" (With tandem wheels & cutting height at 2")
  • Overall length: 16' - 8 1/2" (With tandem wheels & lift cylinder fully extended), 17' - 0 1/2" (With tandem wheels & cutting height at 2")
  • Deck height: 12"
  • Cutting height: 2" to 14"
  • Lift hydraulics-Center deck: 3 1/2" x 8" Re-phasing hydraulic cylinder with hoses, fittings & stroke control spacers
  • Lift hydraulics-Right wing: 3 1/4" x 8" Re-phasing hydraulic cylinder with hoses & fittings
  • Wing folding hydraulics: 3 1/2" x 8" Dual-acting hydraulic cylinder complete with hoses & fittings
  • Wing transport protection: Transport Locks with hitch pins
  • Deck material: 10 gauge top deck and 7 gauge bottom deck
  • Side skirt material: Bolt-on replaceable 1/4" side
  • Skid shoes, Wing deck: Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe.
  • Skid shoes, Center deck: Replaceable: 2 Skid shoes Reversible
  • Skid shoes, Weight box: Reversible & replaceable: 1 Skid shoe
  • Four blades (2 per carrier): 1/2" x 4" Heat treated free swinging alloy steel with up lift
  • Blade overlap: 6"
  • Blade bolt: Keyed with hardened flat washer & locknut
  • Stump jumper / blade holder: 3/16" Thick round dish shaped pan, reinforced with 1" thick blade mounting plate
  • Deck ring: Optional 1/2" x 3" fully welded
  • Front & rear guards: Optional rubber, single chain, double chain, or double chain with cable
  • Input driveline 540 & 1000 rpm: ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate & wing drivelines: Cat. 5 with slip-clutch
  • Wheel options, Standard axle & tandem axle: 6" x 21" Laminated tires, 25.5" new foam filled tires, 29" x 16 ply used aircraft tires with or without foam filling.
  • Number of wheels, Standard axle: 5- Wheel option: 4 on transport axle and one on wing axle 6- Wheel option: 4 on transport axle and two on wing axle
  • Number of wheels, Tandem axle: 5- Wheel option: 4 on transport axle and one non tandem on wing axle 6 - Wheel option: 4 on transport axle and two on wing axle
  • Standard transport axle: Spring-cushioned on trailing arms
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts



Working Width
10 ft. 6 in.
11 ft. 6 3/4 in.
16 ft. 8 1/2 in.
6,060 lb.
Recommended HP
50-250 hp

Related Products